The RE-884U Rugged Dynamic Signal Test and Analysis System, with compact structure, dustproof and anti-vibration, and maximum sampling frequency of 200kHz, is especially designed for data acquisition in various harsh environments, such as on-vehicle, airborne, and shipboard, etc. Expanded via a Gigabit Ethernet switch, the dynamic signals over 1000 channels can be measured and analyzed in parallel and synchronously by a single computer. RE-884U is widely used for the performance test and analysis of various structures in the field of national defense and military industry, aerospace, automobile industry.
8 channels per DAQ module with independent 24-bit A/D converter
GPS/Beidou module is optional to collect the data of the real-time speed and the latitude and longitude synchronously
Support TEDS sensors access
Built-in 24V/4mA biasing circuit, low-pass filter, high pass filter and anti-aliasing filter
Built-in Li-battery, 1h of battery life (80 channels, fully charged)
Up to 100g impact resistance, IP65 environmental rating
| Number of Input Channel | 8 ~ 80 channels |
| Input Coupling | GND, Sin-DC, AC, IEPE (ICP) |
| IEPE Power | 4mA/24V |
| Full-scale Voltage Value | ±0.1V, ±0.3V, ±1.0V, ±3.0V, ±10.0V |
| Voltage Indication Error | ≤ 0.5% |
| Nonlinearity | 0.1% |
| Noise | ≤ 5μV |
| LPF | |
| Filter Type | Third-order Butterworth filter |
| Cut-off Frequency (-3dB±1dB) | 1kHz, 10kHz, 30kHz, PASS |
| Stop-band Attenuation | >-18dB/Oct. |
| Flatness | <0.1dB (Within 2/3 of cut-off frequency) |
| HPF | |
| Cut-off Frequency (-3dB±1dB) | 0.5Hz, 5Hz |
| Stop-band Attenuation | >-6dB/Otc. |
| Flatness | <0.1dB (Above 10 times cut-off frequency) |
| Anti-aliasing Filter | |
| Cut-off Frequency | 1/2.56 of sampling rate |
| Stop-band Attenuation | >-120dB/Oct |
| Flatness | ±0.1dB (Within analysis frequency range) |
| Communication | Gigabit Ethernet |
| A/D Converter | 24-bit Σ-Δ |
| Freq. Response | DC~60kHz (+0.5db ~ -3dB) (30kHz flatness) |
| Sampling Rate | 10Hz, 20Hz, 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz, 10kHz, 20kHz, 50kHz, 100kHz, 200kHz |
| Synchronization Mode | Synchronous clock box or GPS |
| Power Supply | Lithium battery/external 220V AC / External 10~24V DC |
| Battery Life | 1h of battery life (Fully charged and simultaneous sampling of 80 channels) |
| Dimensions | 326mm×210mm×169mm |
| Weight | Approx. 9.5kg |
| Environmental Conditions | |
| Operating Temperature | - 20°C ~ 60°C |
| Operating Humidity | 5 ~ 90%RH@50°C |
| Storage Temperature | - 40°C ~ 70°C |
| Storage Humidity | 90%RH48h@60°C |
Vibration | Frequency Cycle Range: 5Hz ~ 55Hz ~ 5Hz Drive Amplitude (Peak): 0.19mm Sweep Frequency: ≤1Oct./min Duration of Resonant: 20min Vibration Direction: x, y, z |
| Shock | 100g/(4±1)ms |
| Ingress Protection | IP65 |
Figure 1 Single System block diagram
Figure 2 Multiple System Block Diagram
DE-BPS Basic Platform Software
Running on XP/Win7/Win8/Win10 operating system
Parameters setting, Function control, Real-time/post-acquisition analysis, data browsing, cursor readouts, scaling curve, data management and simple processing, report generation, long-term continuous data recording, etc.
| RE-884U Power / Control Module | |
| |
| RE-884U DAQ Module | |
| |
| Synchronous Clock Box (Optional) | |
| |
| RE-884U GPS Module (Optional) | |
| |
